Copy number routines in the \crlmm{} package are available for
Affymetrix 5.0 and 6.0 platforms, as well as several Illumina
platforms.  This vignette assumes that the arrays have already been
successfully preprocessed and genotyped as per the instructions in
the \verb+AffyGW+ and \verb+IlluminaPreprocessCN+
vignettes for the Affymetrix and Illumina platforms,
respectively. While this vignette uses Affymetrix 6.0 arrays for
illustration, the steps at this point are identical for both
platforms.  See \citep{Scharpf2011} for details regarding the
methodology implemented in \crlmm{} for copy number analysis.  In
addition, a compendium describing copy number analysis using the
\crlmm{} package is available from the author's website:
\url{http://www.biostat.jhsph.edu/~rscharpf/crlmmCompendium/index.html}.

\textbf{Limitations:} While a minimum number of samples is not
required for preprocessing and genotyping, copy number estimation in
the \crlmm{} package currently requires at least 10 samples per batch.
The parameter estimates for copy number and the corresponding
estimates of raw copy number will tend to be more noisy for batches
with small sample sizes (e.g., $<$ 50).  Chemistry plate or scan date
are often useful surrogates for batch.  Samples that were processed at
similar times (e.g., in the same month) can be grouped together in the
same batch.

\section{Quality control}

The signal to noise ratio (SNR) estimated by the CRLMM genotyping
algorithm is an overall measure of the separation of the diallelic
genotype clusters at polymorphic loci and can be a useful measure of
array quality.  Small SNR values can indicate possible problems with
the DNA.  Depending on the size of the dataset and the number of
samples with low SNR, users may wish to rerun the preprocessing and
genotyping steps after excluding samples with low SNR.  The SNR is
stored in the \verb+phenoData+ slot of the \Robject{CNSet} object and
is available after preprocessing and genotyping. SNR values below 5
for Affymetrix or below 25 for Illumina may indicate poor sample
quality.  The following code chunk makes a histogram of the SNR values
for the HapMap samples.

<<snr,fig=TRUE,include=FALSE,width=6, height=4>>=
library(lattice)
invisible(open(cnSet$SNR)) snr <- cnSet$SNR[]
close(cnSet$SNR) print(histogram(~snr, panel=function(...){ panel.histogram(...)}, breaks=25, xlim=range(snr), xlab="SNR")) @ \section{Copy number estimation} As described in \cite{Scharpf2011}, the CRLMM-CopyNumber algorithm fits a linear model to the normalized intensities stratified by the diallic genotype call. The intercept and slope from the linear model are both SNP- and batch-specific. The implementation in the \crlmm{} package is encapsulated by the function \Rfunction{crlmmCopynumber} that, using the default settings, can be called by passing a single object of class \Rclass{CNSet}. See the appropriate preprocessing/genotyping vignette for the construction of an object of class \Rclass{CNSet}. <<LDS_copynumber,cache=TRUE>>= crlmmCopynumber(cnSet) @ The following steps were performed by the \Rfunction{crlmmCopynumber} function: \begin{itemize} \item sufficient statistics for the genotype clusters for each batch \item unobserved genotype centers imputed \item posterior summaries of sufficient statistics \item intercept and slope for linear model \end{itemize} Depending on the value of \verb+ocProbesets()+, these summaries are computed for subsets of the markers to reduce the required RAM. Note that the value returned by the \Rfunction{crlmmCopynumber} function in the above example is \verb+TRUE+. The reason the function returns \verb+TRUE+ in the above example is that the elements of the \verb+batchStatistics+ slot have the class \Rclass{ff\_matrix}. Rather than keep the statistical summaries in memory, the summaries are written to files on disk using protocols described in the \Rpackage{ff} package. Hence, while the \Robject{cnSet} object itself is unchanged as a result of the \Rfunction{crlmmCopynumber} function, the data on disk is updated accordingly. Users that are interested in accessing these low-level summaries can refer to the \verb+Infrastructure+ vignette. Note that the data structure depends on whether the elements of the \verb+batchStatistics+ slot are \Robject{ff} objects or ordinary matrices. In this example, the elements of \verb+batchStatistics+ have the class \Rclass{ff\_matrix}. <<classes>>= nms <- ls(batchStatistics(cnSet)) cls <- rep(NA, length(nms)) for(i in seq_along(nms)) cls[i] <- class(batchStatistics(cnSet)[[nms[i]]])[1] all(cls == "ff_matrix") @ The batch-specific statistical summaries computed by \Robject{crlmmCopynumber} are written to files on disk using protocols described in the \R{} package \Rpackage{ff}. The value returned by \Rfunction{crlmmCopynumber} is \verb+TRUE+, indicating that the files on disk have been successfully updated. Note that while the \Robject{cnSet} object is unchanged, the values on disk are different. On the other hand, subsetting the \Robject{cnSet} with the [' method coerces all of the elements to class \Rclass{matrix}. The batch-specific summaries are now ordinary matrices stored in RAM. The object returned by \Robject{crlmmCopynumber} is an object of class \Rclass{CNSet} with the matrices in the \verb+batchStatistics+ slot updated. <<chr1index>>= chr1.index <- which(chromosome(cnSet) == 1) open(cnSet) @ <<subset,cache=TRUE>>= cnSet2 <- cnSet[chr1.index, ] @ <<valuematrix>>= close(cnSet) for(i in seq_along(nms)) cls[i] <- class(batchStatistics(cnSet2)[[nms[i]]])[1] all(cls == "matrix") @ <<matrix_copynumber,cache=TRUE>>= cnSet3 <- crlmmCopynumber(cnSet2) class(cnSet3) @ <<clean, echo=FALSE, results=hide>>= rm(cnSet2); gc() @ \subsection{Marker-specific estimates} %\subsection{Raw copy number} %\paragraph{Log R ratios and B allele frequencies.} \paragraph{Raw total copy number.} Several functions are available that will compute relatively quickly the allele-specific, \emph{raw} copy number estimates. At allele$k$, marker$i$, sample$j$, and batch$p\$, the estimate of allele-specific
copy number is computed by subtracting the estimated background from
the normalized intensity and scaling by the slope coefficient. More
\begin{eqnarray}
\label{eq:cnK}
{\hat c}_{k,ijp} &=& \mbox{max}\left\{\frac{1}{{\hat
\phi}_{k,ip}}\left(I_{k,ijp}-{\hat \nu}_{k,ip}\right), ~0\right\}
\mbox{~for~} k \in \{\A, \B\}.
\end{eqnarray}
\noindent See \cite{Scharpf2011} for details.

The function \Rfunction{totalCopynumber} translates the normalized
intensities to an estimate of raw copy number by adding the
allele-specific summaries in Equation \eqref{eq:cnK}. For large
datasets, the calculation will not be instantaneous as the I/O can be
substantial.  Users should specify either a subset of the markers or a
subset of the samples to avoid using all of the available RAM.  For
example, in the following code chunk we compute the total copy number
at all markers for the first 2 samples, and the total copy number for
chromosome 20 for the first 50 samples.

<<totalCopynumber>>=
tmp <- totalCopynumber(cnSet, i=seq_len(nrow(cnSet)), j=1:2)
dim(tmp)
tmp2 <- totalCopynumber(cnSet, i=which(chromosome(cnSet) == 20), j=seq_len(ncol(cnSet)))
dim(tmp2)
@

Alternatively, the functions \Rfunction{CA} and \Rfunction{CB} compute
the allele-specific copy number.  For instance, the following code
chunk computes the allele-specific summaries at all polymorphic loci
for the first 2 samples.

<<ca>>=
snp.index <- which(isSnp(cnSet) & !is.na(chromosome(cnSet)))
ca <- CA(cnSet, i=snp.index, j=1:2)
cb <- CB(cnSet, i=snp.index, j=1:2)
@

\subsection{Container for log R ratios and B allele frequencies}

A useful container for storing the \crlmm{} genotypes, genotype
confidence scores, and the total or relative copy number at each
marker is the \Rclass{oligoSetList} class.  Coercion of a
\Rclass{CNSet} object to a \Rfunction{oligoSnpSet} object can be
acheived by using the function \Rfunction{constructOligoSetFrom} as
illustrated below. Users should note that if the \verb+assayData+
elements in the \Rclass{CNSet} instance are \Rpackage{ff} objects, the
\verb+assayData+ elements of each element in the \Rclass{oligoSetList}
object will be \Rpackage{ff}-dervied objects (a new
\verb+total_cn*.ff+ file will be created in the \verb+ldPath()+
directory).

<<oligoSnpSet>>=
library(VanillaICE)
open(cnSet3)
oligoSetList <- constructOligoSetListFrom(cnSet3, batch.name=batch(cnSet3)[1])
close(cnSet3)
show(oligoSetList)
class(oligoSetList)
## oligoSnpSet of first chromosome
oligoSetList[[1]]
@

\noindent Note that log R ratios stored in the \Robject{oligoSnpSet}
object can be retrieved by the \Rfunction{copyNumber} accessor.  B
allele frequences are retrieved by the \Rfunction{baf} accessor.

<<testEqual>>=
lrrList <- copyNumber(oligoSetList)
class(lrrList)
dim(lrrList[[1]]) ## log R ratios for chromosome 1.
bafList <- baf(oligoSetList)
dim(bafList[[1]]) ## B allele frequencies for chromosome 1
@
`